StarTrace Dewatering Feeders, Dewater Feeder, Vibrating Feeders Manufacturers

STAR TRACE Pvt Ltd Chennai Based Indian Manufacturer of Vibrating equipments


Dewater Feeder
900 x 1400 mm dewatering
feeder driven by two
overhead mounted vibratory
motors and using
polyurethane drainage panels.

Star Trace Dewatering Feeders are designed for two basic requirments;
1. Remove the excess moisture.
2. Regulate the feed rate of the processing equipment.

Head feed to mineral processing equipments often contains excessive moisture adversely affecting the performance of such equipment.

Polyurthane or stainless steel wedge wire screen panels on the feeder pan allow the water to pass through, drying the solids in the feed.

The vibratory motors can either be mounted below and to the rear of the pan, or overhead. Overhead mounting allows maximum area of drainage panel.

Units range in size from 300 x 900 mm to 1200 x 2500 mm, and can be floor mounted or suspented. The feedrate can be varied by altering the out-of-balance weight settings on the vibratory motors, or by remotely controlling the speed of the motors through a frequency convertor unit.

Dewater Feeder

450 x 2650 mm dewatering feeder driven by two underslung vibratory motors, and using a wedge wire drainage panel. Liners are HDPE.